Cyclicity in ridge patterns on the prograding coasts of Estonia

Recent LiDAR surveys have revealed that on postglacially uplifting coasts of Estonia rhythmic coastal landforms (beach ridge sequences and foredune plains) occur to a considerable extent. We studied four of them to reveal age and periodicity in these multiple ridge systems and discussed their genesis in the Subatlantic (semi‐continental) conditions of the Baltic Sea area. Using recent models of Fennoscandian uplift due to glacial isostatic adjustment (GIA), we constructed Holocene apparent sea level curves for the study sites at Õngu, Mänspe, Haldi and Keibu; converted distance–height shore profiles into time series (including corrections on shore profile non‐linearity and variations in GIA‐eustasy balance); and analysed the patterns using spectral analysis. It was suggested that due to non‐tidal conditions, relatively low‐energy hydrodynamic forcing and small aeolian contribution, the ridges mark ancient shorelines. They are relatively modest in height (mostly 0.2–1 m), form regular and extensive (up to 150 ridges) patterns, and date back to ~9000 years before present. We studied <5‐ka‐old sections. The mean ridge spacing varied, depending also on coastal slope, between 21 and 39 m. Both simple counting and spectral analysis involved some specific limitations, yet the estimates for typical spacing were alike, at 32 (±5) years. The regular nature of the low‐ridge patterns originated from relative sea level lowering and gradual sediment accretion/erosion. However, the progradation was rather uplift‐ than accretion‐driven and the stepwise process in ridge formation was probably not autocyclic. It was governed or modulated by quasi‐periodic 25–40 year cyclicity in local wave forcing, relative sea level variations and wind conditions. Being most likely connected to the North Atlantic Oscillation, the quasi‐regular, decadal‐scale, similarly phased variations may magnify each other's effect on the westerly exposed coasts of Estonia. Additionally, some other (e.g. event‐driven) mechanisms may also be present.     

A new concept for estimating the influence of vegetation on throughfall kinetic energy using aerial laser scanning

Soil loss caused by erosion has enormous economic and social impacts. Splash effects of rainfall are an important driver of erosion processes; however, effects of vegetation on splash erosion are still not fully understood. Splash erosion processes under vegetation are investigated by means of throughfall kinetic energy (TKE). Previous studies on TKE utilized a heterogeneous set of plant and canopy parameters to assess vegetation's influence on erosion by rain splash but remained on individual plant- or plot-levels. In the present study we developed a method for the area-wide estimation of the influence of vegetation on TKE using remote sensing methods. In a literature review we identified key vegetation variables influencing splash erosion and developed a conceptual model to describe the interaction of vegetation and raindrops. Our model considers both amplifying and protecting effect of vegetation layers according to their height above the ground and aggregates them into a new indicator: the Vegetation Splash Factor (VSF). It is based on the proportional contribution of drips per layer, which can be calculated via the vegetation cover profile from airborne LiDAR datasets. In a case study, we calculated the VSF using a LiDAR dataset for La Campana National Park in central Chile. The studied catchment comprises a heterogeneous mosaic of vegetation layer combinations and types and is hence well suited to test the approach. We calculated a VSF map showing the relation between vegetation structure and its expected influence on TKE. Mean VSF was 1.42, indicating amplifying overall effect of vegetation on TKE that was present in 81% of the area. Values below 1 indicating a protective effect were calculated for 19% of the area. For future work, we recommend refining the weighting factor by calibration to local conditions using field-reference data and comparing the VSF with TKE field measurements. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Modest diatom responses to regional warming on the southeast Tibetan Plateau during the last two centuries

A general mean annual temperature increase accompanied with substantial glacial retreat has been noted on the Tibetan Plateau during the last two centuries but most significantly since the mid 1950s. These climate trends are particularly apparent on the southeastern Tibetan Plateau. However, the Tibetan Plateau (due to its heterogeneous mountain landscape) has very complex and spatially differing temperature and precipitations patterns. As a result, intensive palaeolimnological investigations are necessary to decipher these climatic patterns and to understand ecological responses to recent environmental change. Here we present palaeolimnological results from a ²¹⁰Pb/¹³⁷Cs-dated sediment core spanning approximately the last 200 years from a remote high-mountain lake (LC6 Lake, working name) on the southeastern Tibetan Plateau. Sediment profiles of diatoms, organic variables (TOC, C:N) and grain size were investigated. The ²¹⁰Pb record suggests a period of rapid sedimentation, which might be linked to major tectonic events in the region ca. 1950. Furthermore, unusually high ²¹⁰Pb supply rates over the last 50 years suggest that the lake has possibly been subjected to increasing precipitation rates, sediment focussing and/or increased spring thaw. The majority of diatom taxa encountered in the core are typical of slightly acidic to circumneutral, oligotrophic, electrolyte-poor lakes. Diatom species assemblages were rich, and dominated by Cyclotella sp., Achnanthes sp., Aulacoseira sp. and fragilarioid taxa. Diatom compositional change was minimal over the 200-year period (DCCA = 0.85 SD, p = 0.59); only a slightly more diverse but unstable diatom assemblage was recorded during the past 50 years. The results indicate that large-scale environmental changes recorded in the twentieth century (i.e. increased precipitation and temperatures) are likely having an affect on the LC6 Lake, but so far these impacts are more apparent on the lake geochemistry than on the diatom flora. Local and/or regional peculiarities, such as increasing precipitation and cloud cover, or localized climatic phenomena, such as negative climate feedbacks, might have offset the effects of increasing mean surface temperatures.     

Sub-Recent Sexual Populations of Limnocythere inopinata Recorded for the First Time from > 3500 m Altitude on the Tibetan Plateau

<正>The central and northwestern Tibetan Plateau region,also called"Qiangtang Plateau"(30°27'25"-35°39'13"N,83o41'14"-95°10'46"E),is the highest and largest arcticalpine area of the Earth covering approximately 600,000km~2 with altitude ranging from 4600 to 5100 m a.s.l.(Song et al.,2012,Fig.1).Ostracod species of     

One Million Years tephra record at IODP Sites U1436 and U1437: Insights into explosive volcanism from the Japan and Izu arcs

The 1 Myr tephra records of IODP (International Ocean Discovery Program) Holes U1436A and U1437B in the Izu‐Bonin fore‐ and reararc were investigated in order to assess provenance and eruptive volumes, respectively. In total, 304 tephra samples were examined and 260 primary tephra layers were identified. Tephra provenance was determined by means of major and trace element compositions of glass shards and distinguished between Japan and Izu‐Bonin arc origin of the tephra layers. A total of 33 marine tephra compositions were correlated to the Japan arc and 227 to the Izu arc. Twenty marine tephra layers were correlated between the two drilling sites. Additionally, we defined eleven correlations of marine tephra deposits to major widespread Japanese eruptions; from the 1.05 Ma Shishimuta‐Pink Tephra to the 30 ka Aira‐Tn Tephra, both from Kyushu Island. These eruptions provide independent time markers within the sediment record and six correlations were used to date tephra layers from Japan in Hole U1436A to establish an alternative age model for this hole. Furthermore, the minimum distal tephra volumes of all detected events were calculated, which enabled the comparison of the tephra volumes that derived from the Japan and the Izu‐Bonin arcs. For some of the major Japanese eruptions these are the first volume estimations that also include distal deposits. All of the Japanese tephras derived from events with eruption magnitude M_v ≥ 5.6 and three of the investigated eruptions reach magnitudes M_v ≥ 7. Volcanic events of the Izu‐Bonin arc have mostly eruption magnitudes M_v ≤ 5.     

Clam community composition and prey shell size impacts moon snail (Gastropod: Naticidae) drilling frequencies in South Carolina,USA

Moon snail predation on clams is a common model system of predator–prey interactions. In this system, the predator bores through the shell of its prey, leaving a distinct and identifiable hole. Some paleoecological and behavioral research on moon snails suggests a trend in predation preference directed toward clams with small shells. Rarely, however, have studies tested relative drilling frequencies across species and size ranges in natural assemblages of clam communities. We examined the clam community composition at two beaches in South Carolina, USA, and we then tested moon snail predator preferences for (a) clam prey species and (b) whether their selection is related to prey shell size. We collected a total of 1,879 clam shells, identified each shell to species and recorded their anteroposterior length. The species composition of clams differed significantly between the two beaches; Anadara ovalis was dominant at both sites, but three of ten total species were only collected at one beach. Folly Beach had nearly a 60% higher the overall drilling frequency (34.6%) versus Edisto Beach (21.8%), and this may be linked to the differences in clam community compositions at the sites. For A. ovalis and Mulinia lateralis, shells with larger lengths have lower probabilities of being bored by a moon snail. Anadara brasiliana, which generally is a thinner‐shelled clam species, had the highest total drilling frequency (77.2%), and Noetia ponderosa, a thicker‐shelled clam, had a considerably lower drilling frequency (12.0%). We conclude that both community level factors (species composition) and population characteristics (shell size distributions) may influence the local drilling frequency by moon snails.     

Data Analysis and Modeling to Optimize Thermal Treatment Cost and Performance

The objective of in situ thermal treatment is typically to reduce the contaminant mass or average soil concentration below a specified value. Evaluation of whether the objective has been met is usually made by averaging soil concentrations from a limited number of soil samples. Results from several field sites indicate large performance uncertainty using this approach, even when the number of samples is large. We propose a method to estimate average soil concentration by fitting a log normal probability model to thermal mass recovery data. A statistical approach is presented for making termination decisions from mass recovery data, soil sample data, or both for an entire treatment volume or for subregions that explicitly considers estimation uncertainty which is coupled to a stochastic optimization algorithm to identify monitoring strategies to meet objectives with minimum expected cost. Early termination of heating in regions that reach cleanup targets sooner enables operating costs to be reduced while ensuring a high likelihood of meeting remediation objectives. Results for an example problem demonstrate that significant performance improvement and cost reductions can be achieved using this approach.     

The polarization of X-ray emission of some solar flares in July 1974

Preliminary results of polarization measurements at three solar flares of July 5 and 6, 1974, are given. The measurements were performed at h 15 keV with Thomson-scattering polarimeter on the Intercosmos 11 satellite.At the decay phase of the flare on July 5 we obtained P = 3.4–5.0%, which did not exclude some contribution from non-thermal processes. At the flares of July 6 we found P =1.0–1.9% and P = 0.1–2.0%, respectively: neither value exceeds the level of statistical fluctuations.Presented at XVIII COSPAR Meeting (VARNA, May–June 1975), contribution III.B.2.9.     

Depositional setting,provenance, and tectonic-volcanic setting of Eocene–Recent deep-sea sediments of the oceanic Izu–Bonin forearc,northwest Pacific (IODP Expedition 352)

New biostratigraphical, geochemical, and magnetic evidence is synthesized with IODP Expedition 352 shipboard results to understand the sedimentary and tectono-magmatic development of the Izu–Bonin outer forearc region. The oceanic basement of the Izu–Bonin forearc was created by supra-subduction zone seafloor spreading during early Eocene (c. 50–51 Ma). Seafloor spreading created an irregular seafloor topography on which talus locally accumulated. Oxide-rich sediments accumulated above the igneous basement by mixing of hydrothermal and pelagic sediment. Basaltic volcanism was followed by a hiatus of up to 15 million years as a result of topographic isolation or sediment bypassing. Variably tuffaceous deep-sea sediments were deposited during Oligocene to early Miocene and from mid-Miocene to Pleistocene. The sediments ponded into extensional fault-controlled basins, whereas condensed sediments accumulated on a local basement high. Oligocene nannofossil ooze accumulated together with felsic tuff that was mainly derived from the nearby Izu–Bonin arc. Accumulation of radiolarian-bearing mud, silty clay, and hydrogenous metal oxides beneath the carbonate compensation depth (CCD) characterized the early Miocene, followed by middle Miocene–Pleistocene increased carbonate preservation, deepened CCD and tephra input from both the oceanic Izu–Bonin arc and the continental margin Honshu arc. The Izu–Bonin forearc basement formed in a near-equatorial setting, with late Mesozoic arc remnants to the west. Subduction-initiation magmatism is likely to have taken place near a pre-existing continent–oceanic crust boundary. The Izu–Bonin arc migrated northward and clockwise to collide with Honshu by early Miocene, strongly influencing regional sedimentation.     

GNSS satellite transmit power and its impact on orbit determination

Antenna thrust is a small acceleration acting on Global Navigation Satellite System satellites caused by the transmission of radio navigation signals. Knowledge about the transmit power and the mass of the satellites is required for the computation of this effect. The actual transmit power can be obtained from measurements with a high-gain antenna and knowledge about the properties of the transmit and receive antennas as well as losses along the propagation path. Transmit power measurements for different types of GPS, GLONASS, Galileo, and BeiDou-2 satellites were taken with a 30-m dish antenna of the German Aerospace Center (DLR) located at its ground station in Weilheim. For GPS, total L-band transmit power levels of 50–240 W were obtained, 20–135 W for GLONASS, 95–265 W for Galileo, and 130–185 W for BeiDou-2. The transmit power differs usually only slightly for individual spacecraft within one satellite block. An exception are the GLONASS-M satellites where six subgroups with different transmit power levels could be identified. Considering the antenna thrust in precise orbit determination of GNSS satellites decreases the orbital radius by 1–27 mm depending on the transmit power, the satellite mass, and the orbital period.